How to Clean the Drain

How to clean the drain in a Western Australia house is a huge task that takes some time and expertise to get right. If you’ve ever had to clean out a toilet you’ll understand what I mean.

how to clean the drain

There’s nothing worse than scrubbing a drain out of your bathroom only to find that it’s totally blocked up with dust and hair! The best way to ensure that you don’t do this to your house is to consult with an expert. Someone who knows the area inside out.

If you’re unsure of how to do it, try using a plunger and removing it by first removing the base (toilet paper or non-adhesive chemical) and then drawing the toilet paper out with a plunger. Don’t use toilet paper! In this case, you will need to empty the drain.

Once the drain is empty try to find out where the waste material is coming from. You can get this information by looking at the threads that connect the pipes to the toilet. If there are large holes in the threads then it means the waste material has simply fallen into the drain.

The next step needs to be to empty the lining of the drain. You can do this using either soap or bleach.

There is no difference between the two methods except for the extent to which they are effective at ridding the drain of waste material. In most cases, you can simply clean the lining by using water and soap. The main thing to remember is to rinse some more until the water is clear.

If there is a large piece of a flange that comes off on the outside of the pipe then you might want to remove it with a large piece of a wrench or claw hammer. Be sure to clean the area thoroughly after doing this so you don’t leave any residue.

When you do remove the flange there should be a little bit of oil leftover. Use a bit of turpentine or similar lubricant to ease the excess away.

After that has been done it’s time to take the drain and replace it. First of all, replace the base on the drain using something like an orange peel.

Make sure that you have it all lined up correctly as you’ll be replacing it in the same place. Next, try to locate the pipe that leads to the sink and go underneath it. Using a pair of pliers, you should be able to tighten down the two bolts.

Now you need to go back over the drain area. It’s always a good idea to replace the lining and make sure that it is in good shape before Drain Cleaning Perth starts to work on the problem.

Before you leave, you can also try using a toothbrush to wash the inside of the pipe. If you’re planning on doing this in the morning, you should take a moment to rinse it out thoroughly.